Our Technology

Energy Monitoring

0 to 240 volts input ( for measurement)  Per Phase

Internal Operating voltage 5 volts @ 1.5 amps

Current Measurement  0 to 100 amps 2 phase ( non-contact coils)

Operating temperature from -40 °C to +95 °C

Specifications:

• Active power accuracy:

< 0.1% error over 5000: 1 dynamic range

< 0.5% error over 10000: 1 dynamic range

• Exceeds 50-60 Hz EN 50470-x, IEC 62053-2x, ANSI12.2x standard requirements for AC watt meters

• Reactive power accuracy:

< 0.1% error over 2000:1 dynamic range

Dual mode apparent energy calculation

Instantaneous and averaged power

RMS and instantaneous voltage and current

Under and overvoltage detection (sag and swell) and monitoring

Overcurrent detection and monitoring

Programmable LED and interrupt outputs

Four independent 24-bit 2nd order sigma-delta ADCs

Two programmable gain chopper stabilized low-noise and low-offset amplifiers

Bandwidth 3.6 kHz at -3 dB

Vcc supply range 3.3 V ± 10%

Comunications:

FCC Approved LTE Cat 1.

FDD LTE: B1/B3/B5/B7/B28 WCDMA: B1/B5

LTE LTE-FDD Max 10Mbps (DL) Max 5Mbps (UL) DC-HSPA+ Max 42Mbps (DL) Max 5.76Mbps (UL) UMTS Max 384Kbps (DL) Max 384Kbps (UL) EDGE Max 236.8Kbps (DL) Max 236.8Kbps (UL) GPRS Max 85.6Kbps (DL) Max 85.6Kbps (UL) Voice Speech Codec Modes HR, FR, EFR, AMR, AMR-WB Echo Arithmetic Echo Cancellation Noise Reduction eCall* Accident, Emergency Services

Check our news section on a regular basis to alway stay in the loop.