Energy Monitoring

Energy Monitor Model EM-2P-LT

​

Click here for the Installation Diagram

​

0 to 240 volts input ( for measurement)  Per Phase

Internal Operating voltage 5 volts @ 1.5 amps

Current Measurement  0 to 100 amps 2 phase ( non-contact coils)

Operating temperature from -40 °C to +95 °C

​

Detailed Specifications:

​

Active power accuracy:

< 0.1% error over 5000: 1 dynamic range

< 0.5% error over 10000: 1 dynamic range

​

Exceeds 50-60 Hz EN 50470-x, IEC 62053-2x, ANSI12.2x standard requirements for AC watt meters

​

Reactive power accuracy: < 0.1% error over 2000:1 dynamic range

​

Dual mode apparent energy calculation

​

Instantaneous and averaged power

​

RMS and instantaneous voltage and current

​

Under and over voltage detection (sag and swell) and monitoring

​

Over current detection and monitoring

​

Programmable LED and interrupt outputs

​

Four independent 24-bit 2nd order sigma-delta ADCs

​

Two programmable gain chopper stabilized low-noise and low-offset amplifiers

​

Bandwidth 3.6 kHz at -3 dB

Vcc supply range 3.3 V ± 10%

Comunications:

​

FCC Approved LTE Cat 1.

FDD LTE: B1/B3/B5/B7/B28 WCDMA: B1/B5

LTE LTE-FDD Max 10Mbps (DL) Max 5Mbps (UL) DC-HSPA+ Max 42Mbps (DL) Max 5.76Mbps (UL) UMTS Max 384Kbps (DL) Max 384Kbps (UL) EDGE Max 236.8Kbps (DL) Max 236.8Kbps (UL) GPRS Max 85.6Kbps (DL) Max 85.6Kbps (UL) Voice Speech Codec Modes HR, FR, EFR, AMR, AMR-WB Echo Arithmetic Echo Cancellation Noise Reduction eCall* Accident, Emergency Services